Water Science and Engineering - 开云电竞网

Assessment of impact of water diversion projects on ecological water uses in arid region

Song-hao SHANG, Hui-jie WANG — 2013-04-30

Song-hao SHANG, Hui-jie WANG In arid regions, large-scale water diversion from rivers leads to significant changes in river flow regimes, which may have large impacts on ecological water uses of river-dependent ecosystems, such as river, lake, wetland, and riparian ecosystems. To assess the integrated impact of water diversion on ecological water uses, we proposed a hierarchy evaluation model composed of four layers representing the evaluation goal, sub-areas of the influenced region, evaluation criteria, and water diversion schemes, respectively. The evaluation criteria for different types of ecological water uses were proposed, and the analytical hierarchy process was used for the integrated assessment. For a river ecosystem, the percentage of mean annual flow was used to define the grade of environmental flow. For a lake ecosystem, water recharge to the lake to compensate the lake water losses was used to assess the ecological water use of a lake. The flooding level of the wetland and the groundwater level in the riparian plain were used to assess the wetland and riparian ecological water uses, respectively. The proposed model was applied to a basin in northern Xinjiang in northwest China, where both water diversion and inter-basin water transfer projects were planned to be carried out. Based on assessment results for the whole study area and two sub-areas, an appropriate scheme was recommended from four planning schemes. With the recommended scheme, ecological water uses of the influenced ecosystems can be maintained at an acceptable level. Meanwhile, economical water requirements can be met to a great extent. Water Science and Engineering. 2013 6(2): 119-130.

Climate change characteristics of Amur River

Lan-lan YU, Zi-qiang XIA, Jing-ku LI, Tao CAI — 2013-04-30

Lan-lan YU, Zi-qiang XIA, Jing-ku LI, Tao CAI Unusually severe weather is occurring more frequently due to global climate change. Heat waves, rainstorms, snowstorms, and droughts are becoming increasingly common all over the world, threatening human lives and property. Both temperature and precipitation are representative variables usually used to directly reflect and forecast the influences of climate change. In this study, daily data (from 1953 to 1995) and monthly data (from 1950 to 2010) of temperature and precipitation in five regions of the Amur River were examined. The significance of changes in temperature and precipitation was tested using the Mann-Kendall test method. The amplitudes were computed using the linear least-squares regression model, and the extreme temperature and precipitation were analyzed using hydrological statistical methods. The results show the following: the mean annual temperature increased significantly from 1950 to 2010 in the five regions, mainly due to the warming in spring and winter; the annual precipitation changed significantly from 1950 to 2010 only in the lower mainstream of the Amur River; the frequency of extremely low temperature events decreased from 1953 to 1995 in the mainstream of the Amur River; the frequency of high temperature events increased from 1953 to 1995 in the mainstream of the Amur River; and the frequency of extreme precipitation events did not change significantly from 1953 to 1995 in the mainstream of the Amur River. This study provides a valuable theoretical basis for settling disputes between China and Russia on sustainable development and utilization of water resources of the Amur River. Water Science and Engineering. 2013 6(2): 131-144.

Discharge estimation based on machine learning

Zhu JIANG, Hui-yan WANG, Wen-wu SONG — 2013-04-30

Zhu JIANG, Hui-yan WANG, Wen-wu SONG To overcome the limitations of the traditional stage-discharge models in describing the dynamic characteristics of a river, a machine learning method of non-parametric regression, the locally weighted regression method was used to estimate discharge. With the purpose of improving the precision and efficiency of river discharge estimation, a novel machine learning method is proposed: the clustering-tree weighted regression method. First, the training instances are clustered. Second, the k-nearest neighbor method is used to cluster new stage samples into the best-fit cluster. Finally, the daily discharge is estimated. In the estimation process, the interference of irrelevant information can be avoided, so that the precision and efficiency of daily discharge estimation are improved. Observed data from the Luding Hydrological Station were used for testing. The simulation results demonstrate that the precision of this method is high. This provides a new effective method for discharge estimation. Water Science and Engineering. 2013 6(2): 145-152.

Anisotropic diffusion of volatile pollutants at air-water interface

Li-ping CHEN, Jing-tao CHENG, Guang-fa DENG — 2013-04-30

Li-ping CHEN, Jing-tao CHENG, Guang-fa DENG The volatile pollutants that spill into natural waters cause water pollution. Air pollution arises from the water pollution because of volatilization. Mass exchange caused by turbulent fluctuation is stronger in the direction normal to the air-water interface than in other directions due to the large density difference between water and air. In order to explore the characteristics of anisotropic diffusion of the volatile pollutants at the air-water interface, the relationship between velocity gradient and mass transfer rate was established to calculate the turbulent mass diffusivity. A second-order accurate smooth transition differencing scheme (STDS) was proposed to guarantee the boundedness for the flow and mass transfer at the air-water interface. Simulations and experiments were performed to study the trichloroethylene (C2HCl3) release. By comparing the anisotropic coupling diffusion model, isotropic coupling diffusion model, and non-coupling diffusion model, the features of the transport of volatile pollutants at the air-water interface were determined. The results show that the anisotropic coupling diffusion model is more accurate than the isotropic coupling diffusion model and non-coupling diffusion model. Mass transfer significantly increases with the increase of the air-water relative velocity at a low relative velocity. However, at a higher relative velocity, an increase in the relative velocity has no effect on mass transfer. Water Science and Engineering. 2013 6(2): 153-163.

Nitrogen and phosphorus changes and optimal drainage time of flooded paddy field based on environmental factors

Meng-hua XIAO, Shuang-en YU, Yan-yan WANG, Rong HUANG — 2013-04-30

Meng-hua XIAO, Shuang-en YU, Yan-yan WANG, Rong HUANG While many controlled irrigation and drainage techniques have been adopted in China, the environmental effects of these techniques require further investigation. This study was conducted to examine the changes of nitrogen and phosphorus of a flooded paddy water system after fertilizer application and at each growth stage so as to obtain the optimal drainage time at each growth stage. Four treatments with different water level management methods at each growth stage were conducted under the condition of ten-day continuous flooding. Results show that the ammonia nitrogen (NO₃^--N) concentration reached the peak value once the fertilizer was applied, and then decreased to a relatively low level seven to ten days later, and that the nitrate nitrogen (NH₄⁺-N) concentration gradually rose to its peak value, which appeared later in subsurface water than in surface water. Continuous flooding could effectively reduce the concentrations of NH₄⁺-N, NO₃^--N, and total phosphorus (TP) in surface water. However, the paddy water disturbance, in the process of soil surface adsorption and nitrification, caused NH₄⁺-N to be released and increased the concentrations of NH₄⁺-N and NO₃^--N in surface water. A multi-objective controlled drainage model based on environmental factors was established in order to obtain the optimal drainage time at each growth stage and better guide the drainage practices of farmers. The optimal times for surface drainage are the fourth, sixth, fifth, and sixth days after flooding at the tillering, jointing-booting, heading-flowering, and milking stages, respectively. Water Science and Engineering. 2013 6(2): 164-177.

Mechanism of back siltation in navigation channel in Dinh An Estuary, Vietnam

Viet-Thanh NGUYEN, Jin-hai ZHENG, Ji-sheng ZHANG — 2013-04-30

Viet-Thanh NGUYEN, Jin-hai ZHENG, Ji-sheng ZHANG The Dinh An Estuary is one of the Nine Dragon estuaries of the Mekong River. An international navigation channel was built in the estuary for vessels traveling from the South China Sea to the southwestern area of Vietnam and then to Phnom Penh, Cambodia. The morphological evolution of the navigation channel is complicated and unstable. The back siltation intensity in the navigation channel has largely increased and been concentrated in the curvature segments of the channel since 1980. In this study, based on simulation results and measured data, five key factors that influence the back siltation in the navigation channel were systematically analyzed. These factors included the increasing elevation gap between the channel and the nearby seabed, the disadvantageous hydrodynamic conditions, sediment transport, mixing of saltwater and freshwater, and wave effects in the navigation channel. It is shown that the back siltation to a large extent results from the low current velocity of the secondary ocean circulation, which often occurs in the curvature segments of the channel. Suspended sediment also settles in the channel due to the decrease of the current velocity and the sediment transport capacity when flow passes through the channel. The changes of hydrodynamic conditions are responsible for the majority of the severe siltation in the curvature segments of the navigation channel. Water Science and Engineering. 2013 6(2): 178-188.

Estimation of hydraulic jump on corrugated bed using artificial neural networks and genetic programming

Akram ABBASPOUR, Davood FARSADIZADEH, Mohammad Ali GHORBANI — 2013-04-30

Akram ABBASPOUR, Davood FARSADIZADEH, Mohammad Ali GHORBANI Artificial neural networks (ANNs) and genetic programming (GP) have recently been used for the estimation of hydraulic data. In this study, they were used as alternative tools to estimate the characteristics of hydraulic jumps, such as the free surface location and energy dissipation. The dimensionless hydraulic parameters, including jump depth, jump length, and energy dissipation, were determined as functions of the Froude number and the height and length of corrugations. The estimations of the ANN and GP models were found to be in good agreement with the measured data. The results of the ANN model were compared with those of the GP model, showing that the proposed ANN models are much more accurate than the GP models. Water Science and Engineering. 2013 6(2): 189-198.

Seismic failure modes and seismic safety of Hardfill dam

Kun XIONG, Yong-hong WENG, Yun-long HE — 2013-04-30

Kun XIONG, Yong-hong WENG, Yun-long HE Based on microscopic damage theory and the finite element method, and using the Weibull distribution to characterize the random distribution of the mechanical properties of materials, the seismic response of a typical Hardfill dam was analyzed through numerical simulation during the earthquakes with intensities of 8 degrees and even greater. The seismic failure modes and failure mechanism of the dam were explored as well. Numerical results show that the Hardfill dam remains at a low stress level and undamaged or slightly damaged during an earthquake with an intensity of 8 degrees. During overload earthquakes, tensile cracks occur at the dam surfaces and extend to inside the dam body, and the upstream dam body experiences more serious damage than the downstream dam body. Therefore, under the seismic conditions, the failure pattern of the Hardfill dam is the tensile fracture of the upstream regions and the dam toe. Compared with traditional gravity dams, Hardfill dams have better seismic performance and greater seismic safety. Water Science and Engineering. 2013 6(2): 199-214.

Discrete element simulation of crushable rockfill materials

Lei SHAO, Shi-chun CHI, Liang-jing ZHOU, Yu-zan WANG — 2013-04-30

Lei SHAO, Shi-chun CHI, Liang-jing ZHOU, Yu-zan WANG A discrete element method was used to study the evolution of particle crushing in a rockfill sample subjected to triaxial shear. A simple procedure was developed to generate clusters with arbitrary shapes, which resembled real rockfill particles. A theoretical method was developed to define the failure criterion for an individual particle subjected to an arbitrary set of contact forces. Then, a series of numerical tests of large-scale drained triaxial tests were conducted to simulate the behaviors of the rockfill sample. Finally, we examined the development of micro-characteristics such as particle crushing, contact characteristics, porosity, deformation, movement, and energy dissipation. The simulation results were partially compared with the laboratory experiments, and good agreement was achieved, demonstrating that the particle crushing model proposed can be used to simulate the drained triaxial test of rockfill materials. Based on a comparison of macro behaviors of the rockfill sample and micro structures of the particles, the microscopic mechanism of the rockfill materials subjected to triaxial shear was determined qualitatively. It is shown that the crushing rate, rather than the number of crushed particles, can be used to reflect the relationship between macro- and micro-mechanical characteristics of rockfill materials. These research results further develop our understanding of the deformation mechanism of rockfill materials. Water Science and Engineering. 2013 6(2): 215-229.

Simulation algorithm for spiral case structure in hydropower station

Xin-yong XU, Zhen-yue MA, Hong-zhan ZHANG — 2013-04-30

Xin-yong XU, Zhen-yue MA, Hong-zhan ZHANG In this study, the damage-plasticity model for concrete that was verified by the model experiment was used to calculate the damage to a spiral case structure based on the damage mechanics theory. The concrete structure surrounding the spiral case was simulated with a three-dimensional finite element model. Then, the distribution and evolution of the structural damage were studied. Based on investigation of the change of gap openings between the steel liner and concrete structure, the impact of the non-uniform variation of gaps on the load-bearing ratio between the steel liner and concrete structure was analyzed. The comparison of calculated results of the simplified and simulation algorithms shows that the simulation algorithm is a feasible option for the calculation of spiral case structures. In addition, the shell-spring model was introduced for optimization analysis, and the results were reasonable. Water Science and Engineering. 2013 6(2): 230-240.